METERS OVERVIEW
Check out the wide variety of meters available, including Low E meters.
ETEKT + Low-E Detector Meter
Locate invisible Low-E coatings on IG Units with a definitive, non-destructive test that offers peace of mind when recommending safe solar film solutions! The ETEKT + is the Industry Standard and has played an essential role for glaziers worldwide for over 30 years. With the release of the AE1601 (third generation ETEKT+), we've improved the reliability and temperature stability of the meter without compromising the features our customers have grown to love. Locate invisible Low-E coatings on IG units with a definitive, non-destructive test.
The IMPROVED ETEKT + Low-E Coating Detector allows you to:
-
Confirm the invisible Low-E coating is correctly installed on your double pane IG units with a single test from a single side. You can also test a triple-pane window by testing both sides.
-
During IG fabrication, ensure proper orientation of the Low-E coated glass so the brushes of the glasswasher do not damage it.
-
Prove to the customer that the invisible, money-saving Low-E coating is on their windows before installation.
Enforcer II Tint Meter
is now 1/3 the size, 1/5 the weight, auto-calibration, and it runs on CR2032, 3V coin cell battery which is included, and good for 100 uses. The interior switch has been redesigned with protective foam. As all Laser Labs, Inc tint meters the accurate Enforcer II is accurate within plus or minus 2% and are not affected by humidity and are reliable from 0 - 100 Degrees F, day or night. It works on roll down windows, just slide it over the window and wait for the reading, which takes about four seconds to calculate.
Tint-Chek Window Tint Meter TC1800
Measure VLT or Visible Light Transmission (Transmittance) of automotive glass as well as any glass/film up to 1/4" or 6.5mm thick.
Features and Benefits:
> TC1800 is rugged and made with quality components that will last for years.
> Designed with no moving parts which results in tremendous reliability and durability.
> You can slide the glass into the opening in any direction, with no concern for damaging a lever switch or scratching the surface of the glass being tested.
> TC1800 takes high-speed measurements shown on the real-time display.
> No drifting of values, as the TC1800 locks on one accurate result.
> Auto-off feature after several minutes of non-use to help conserve battery life.
> TC1800 uses patent-pending techniques to remove any ambient light conditions that may be changing in the testing environment.
> TC1800 is so thin it fits comfortably into a shirt pocket and also makes the device easier to slip around tight edges of a car window.